Client devices cannot enter a network, and the network administrator determines the DHCP scope is exhausted. The administrator wants to avoid creating a new DHCP pool. Which of the following can the administrator perform to resolve the issue?
Correct Answer:D
Which of the following routing protocols is used to exchange routeinformation between public autonomous systems?
Correct Answer:B
A network engineer is investigating reports of poor network performance. Upon reviewing a report, the engineer finds that jitter at the office is greater than 10ms on the only WANconnection available. Which of the following would be MOST affected by this statistic?
Correct Answer:A
During the security audit of a financial firm the Chief Executive Officer (CEO) questions why there are three employees who perform very distinct functions on the server. There is an administrator for creating users another for assigning the users lo groups and a third who is the only administrator to perform file rights assignment Which of the following mitigation techniques is being applied'
Correct Answer:B
SIMULATION
You have been tasked with setting up a wireless network in anoffice. The network will consist of 3 Access Points and a single switch. The network must meet the following parameters:
The SSIDs need to be configured as CorpNet with a key of S3cr3t! The wireless signals should not interfere with each other
The subnet the Access Points and switch are on should only support 30 devices maximum The Access Points should be configured to only support TKIP clients at a maximum speed INSTRUCTONS
Click on the wireless devices and review their information and adjust the settingsof the access points to meet the given requirements.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.
Solution:
On the first exhibit, the layout should be as follows Access Point Name AP1
IP Address 192.168.1.3
Gateway 192.168.1.2 SSID corpnet
SSID Broadcast yes Mode G
Channel 1 Speed Auto Duplex Auto WPA
Passphrase S3cr3t! Exhibit 2 as follows Access Point Name AP2 IP Address 192.168.1.4
Gateway 192.168.1.2 SSID corpnet
SSID Broadcast yes Mode G
Channel 6 Speed Auto
Duplex Auto WPA
Passphrase S3cr3t! Exhibit 3 as follows Access Point Name AP3 IP Address 192.168.1.5
Gateway 192.168.1.2 SSID corpnet
SSID Broadcast yes Mode G
Channel 11 Speed Auto Duplex Auto WPA
Passphrase S3cr3t!
Does this meet the goal?
Correct Answer:A