Free NS0-184 Exam Dumps

No Installation Required, Instantly Prepare for the NS0-184 exam and please click the below link to start the NS0-184 Exam Simulator with a real NS0-184 practice exam questions.
Use directly our on-line NS0-184 exam dumps materials and try our Testing Engine to pass the NS0-184 which is always updated.

Exam Code: NS0-184
Exam Title: NetApp Certified Storage Installation Engineer - ONTAP
Vendor: Network-Appliance
Exam Questions: 60
Last Updated: November 15th,2024

Question 1

You are deploying a new AFF All SAN Array A250 into a customer’s existing data fabric.
In this scenario, which two tools would give insight into their existing Cisco MDS fabric configuration?
(Choose two.)

A. Brocade SAN Health
B. Cisco Data Center Network Manager (DCNM)
C. Active IQ
D. Active IQ Config Advisor

Correct Answer:BC
Explanation\:
Reference: https://www.cisco.com/c/en/us/products/collateral/storage-networking/mds-9700-seriesmultilayerdirectors/
cisco-ucs-mds.html
https://www.cisco.com/c/en/us/products/collateral/servers-unified-computing/ucs-x-series-modularsystem/
flexpod-datacenter-ucs-intersight.html

Question 2

Which two switch operating system are supported on ONTAP cluster switches? (Choose two.)

A. Brocade FOS
B. Cisco NX-OS
C. CiscoIOS
D. Broadcom EFOS

Correct Answer:BD
Reference: https://docs.netapp.com/us-en/ontap-systems-switches/pdfs/fullsitesidebar/AFF_and_FAS_Switch_Documentation.pdf

Question 3

Click the Exhibit button.
NS0-184 dumps exhibit
A customer wants to replace their ONTAP cluster CN1610 switches with Cisco Nexus 3132Q-V
switches. They want to perform a non-disruptive upgrade.
Referring to the exhibit, which cable will be required to non-disruptively migrate to the new
switches?

A. a 10GbE SFP+ to SFP+ cable
B. a 100GbE QSFP28+ to 4x25GbE SFP28+ cable
C. a 40GbE QSFP+ to QSFP+ cable
D. a 40GbE QSFP+ to 4x10GbE SFP+ cable

Correct Answer:B
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/upgrade/guide/b_Cisco_Nexus_9000_Series_NXOS_Software_Upgrade_and_Downgrade_Guide_Release_7x/b_Cisco_Nexus_9000_Series_NXOS_Software_Upgrade_and_Downgrade_Guide_Release_7x_chapter_010.html

Question 4

You are preparing to install a new 2-node AFF A250 system at a customer site with an existing cluster
that uses NetApp CN1610 cluster interconnect switches.
In this scenario, what are two valid actions for this installation? (Choose two.)

A. Add the new nodes to the existing cluster and switches.
B. Createanew2-nodeswitchedclusterthatusestheCN1610clusterswitches.
C. Createanew2-nodeswitchlesscluster.
D. Migrate the existing cluster to new switches and add the new nodes.

Correct Answer:BD
Reference:
https://kb.netapp.com/Advice_and_Troubleshooting/Flash_Storage/AFF_Series/Controller_Hardwar
e_Upgrade3A_Adding_AFF_A250_nodes_to_existing_cluster_report_HA_interconnect_errors_and_c
annot_perform_takeover

Question 5

You completed a 2-node AFF A700 installation according to the poster. You run the disk show -fields
owner command and notice that all drives are assigned to node 1.
In this scenario, which tool would you use to access documentation and guidelines to solve the
issue?

A. Active IQ Unified Manager
B. Active IQ One Collect
C. NET2
D. NetAppDocs

Correct Answer:D
Reference: https://github.com/NetAppDocs